GSC Spindle & Servo Motor Repair
Southeast Servo insures quality for our spindle and servo motor repairs by checking every waveform and every signal that a motor requires to run. All test results are recorded including BEMF readings, winding test results, all feedback signals, and alignment readings. All feedback signals are checked individually and collectively. New bearings are installed on each motor that we repair and all spindle and servo motors are fully run tested. Using the feedback from the motor, each motor is test run in a closed loop test for 20 to 30 minutes to check for defective bearings, proper alignment, vibration, or noise.
We offer the fastest turn around times available on GSC spindle & servo motor repair. And we don't charge big prices! We insure quality for our spindle and servo motor repairs by checking every waveform and every signal that a spindle or servo motor requires to run. All feedback signals are checked individually and collectively. All motors are fully run tested in a closed loop test for 20 to 30 minutes. We know our customers depend on us to make quick, reliable, efficient motor repairs for them 24 hours a day, 365 days a year.
Southeast Servo warrants GSC spindle & servo motor repairs for workmanship for 15 months from the date of repair.
We offer free evaluations on GSC spindle & servo motors normally in about a week.
RUSH service is available for GSC spindle & servo motor repairs; many can be repaired the same day; most can be repaired in 2-3 days.
Failure analysis is included with each GSC spindle & servo motor repair. Give us about a week and we will tell you what we found wrong with your servo motor, what we think may have caused the problem(s), and what we are going to do to remanufacture your servo motor like new.
Southeast Servo carries an extensive inventory of GSC spindle & Servo Motor Spare Parts to repair old and obsolete servo motors
Your GSC spindle & servo motor is repaired and tested on premises at our plant in Norris, Tennessee.
Local pickup and delivery for servo motor repair is available through local distributors in your area.
Servo and spindle motor repair is Southeast Servo's only business. You will find that we are both quicker and more reliable than the larger “we can repair anything you send us” repair houses. While they may be good at electronic board repair or hydraulic repair, servo and spindle motor repairs are almost never their core competency. You can be assured that every servo or spindle repaired by Southeast Servo will work when it gets back.
MANUFACTURERS REPAIRED