Control Techniques Servo Motor Repair
Southeast Servo insures quality for our servo motor repairs by checking every waveform and every signal that a servo motor requires to run. All test results are recorded including BEMF readings, winding test results, all feedback signals, and alignment readings. All feedback signals are checked individually and collectively. New bearings are installed on each motor that we repair and all servo motors are fully run tested. Using the feedback from the motor, each motor is test run in a closed loop test for 20 to 30 minutes to check for defective bearings, proper alignment, vibration, or noise.
We offer the fastest turn around times available on Control Techniques servo motor repair. And we don't charge big prices! We know our customers depend on us to make quick, reliable, efficient servo motor repairs for them 24 hours a day, 365 days a year.
Southeast Servo warrants Control Techniques servo motor repairs for workmanship for 15 months from the date of repair.
We offer free evaluations on Control Techniques servo motors normally in about a week.
RUSH service is available for Control Techniques servo motor repairs; many can be repaired the same day; most can be repaired in 2-3 days.
Failure analysis is included with each Control Techniques servo motor repair. Give us about a week and we will tell you what we found wrong with your servo motor, what we think may have caused the problem(s), and what we are going to do to remanufacture your servo motor like new.
Southeast Servo carries an extensive inventory of Control Techniques Servo Motor Spare Parts to repair old and obsolete servo motors
Your Control Techniques servo motor is repaired and tested on premises at our plant in Norris, Tennessee.
Local pickup and delivery for servo motor repair is available through local distributors in your area.
Southeast Servo insures quality for our servo motor repairs by checking every waveform and every signal that a servo motor requires to run. All test results are recorded including BEMF readings, winding test results, all feedback signals, and alignment readings. All feedback signals are checked individually and collectively. New bearings are installed on each motor that we repair and all servo motors are fully run tested. Using the feedback from the motor, each motor is test run in a closed loop test for 20 to 30 minutes to check for defective bearings, proper alignment, vibration, or noise.
MANUFACTURERS REPAIRED